Stamping Press Repair and Rebuilding
Click on Picture to Enlarge
|
|
|
|
|||||||||||||||||||||||||||||||
| 150 ton Bliss Press Completely Rebuilt, Shut Height Increased 4", and New Tie Rods |
150 ton Bliss Press Completely Rebuilt, Shut Height Increased 4", and New Tie Rods |
Setting Up a Cylinder on the Boring Mill |
Minster Press on Truck Being Delivered to St. Clair Machine Repair |
|||||||||||||||||||||||||||||||
|
|
|
|
|||||||||||||||||||||||||||||||
| Crankshaft for 300 ton Minster |
Machining Crankshaft in Lathe |
100 ton Bliss Press Completely Rebuilt |
100 Ton Bliss Press Completely Rebuilt |
|||||||||||||||||||||||||||||||
|
|
|
|
|||||||||||||||||||||||||||||||
| Preparing to Remove Clutch From 400 Ton Minster Press |
Because of its Size, the Clutch Must Be Hoisted Through the Roof |
Crane Begins to Hoist the Clutch Through the Roof |
Crane Begins to Hoist the Clutch Through the Roof |
|||||||||||||||||||||||||||||||
|
|
|
|
|||||||||||||||||||||||||||||||
| Clutch Being Hoisted Through the Roof |
Clutch for 400 Ton Minster Being Lowered onto Truck |
Clutch for 400 Ton Minster Being Lowered and Secured for Delivery to St. Clair Machine Repair |
Because of its Size, the Clutch Must Be Hoisted Through the Roof With a Crane |
|||||||||||||||||||||||||||||||
